Aldi

Official Websites

• https://www.aldi.de
• https://www.aldi-nord.de
• https://www.aldi-sued.de/de/homepage.html
• https://www.aldi.com
• https://www.aldi.com.au
• http://www.aldi.com
• https://www.aldi.com.au/en/about-aldi/product-registration
• https://www.aldi.dk
• https://www.aldi.es
• https://store.aldi.com.au
• https://www.aldi.it
• https://www.aldirecruitment.co.uk
• https://aldi.de

Brand Guidelines

2018

Brand Summary

Mission

• To provide high-quality, responsibly sourced products with clear, compliant, and consumer-friendly packaging that meets all regulatory and sustainability standards.

Core Values

• Quality
• Transparency
• Sustainability
• Compliance
• Responsibility

Target Audience

• Consumers seeking value, quality, and transparency in food and non-food products, with a focus on those who care about sustainability, clear labelling, and responsible sourcing.

Personality Traits

• Trustworthy
• Responsible
• Modern
• Accessible
• Consistent

Visual Identity Overview

• The visual identity is clean, modern, and highly structured, with a focus on clear labelling, consistent use of approved logos and icons, a defined color palette, and strict typography rules. Packaging emphasizes legibility, compliance, and the use of certification marks to communicate quality and sustainability.

Categories

Barcode Guidelines

• Refer to the ALDI Barcode and QR Code Guidelines for the most up to date Barcode and QR Code information for all packaging types.

Qr Code Guidelines

• Refer to the ALDI Barcode and QR Code Guidelines for the most up to date Barcode and QR Code information for all packaging types.

Color Palette

• COLOUR PALETTE CMYK 0%C, 93%M, 79%Y, 0%/K CMYK 100%C, 85%M, 5%Y, 22%K BLACK CMYK 0%C, 0%M, 0%Y, 100%K
• COLOUR: Complimentary to the colouring of the Health Star Rating, %DI Discs or base colour of pack.
• The Health Star Rating graphic should be coloured to complement the designs overall colour set. The colours to the right are for example only and can be changed to suit each brand.
• Colours for the Discs are intended to compliment the packaging and are chosen using the packagings colour palette.
• COLOURS %01 %ROI PRIMARY PRIMARY
• %DI PRIMARY 100C 95M
• %DI SECONDARY 100C
• %RDI PRIMARY 65C 100Y 42K
• %RDI SECONDARY 50C 100Y
• PMS 285 Process Breakdown 90%C 48%M 0%Y 00/oK
• PMS 369 Process Breakdown 68%C 0%M100%Y 00/oK PANTONE 369
• PMS 285 Process Breakdown 90%C 50%M 0%Y 00/oK
• PMS 298 Process Breakdown I-1 67%C 3%M 0%Y 0%K PANTONE 298 LOGO

Typography

• To ensure consistency across all ALDI brands for Health Star Rating, %DI Discs, How to Read Panels, and NIPs, only Helvetica Neue is to be used in the weights shown. For Country of Origin food labelling, only Interstate Bold is to be used. HELVETICA NEUE 57 CONDENSED
• ABCDE…Z abcdefg h ij kl m nopq rstuvwxyz 01334567890 HELVETICA NEUE 77 BOLD CONDENSED
• ABCDE…Z abcdefghijklmnopqrstuvwxyz 01334567890 HELVETICA NEUE 55 ROMAN
• ABCDE…Z abcdefghijklmnopqrstuvwxyz 01334567890 HELVETICA NEUE 75 BOLD
• ABCDE…Z abcdefghijklmnopqrstuvwxyz 01334567890 HELVETICA NEUE 85 HEAVY
• ABCDE…Z abcdefghijklmnopqrstuvwxyz 01334567890 HELVETICA NEUE 95 BLACK
• ABCDE…Z abcdefghijklmnopqrstuvwxyz 01334567890 INTERSTATE BOLD
• To ensure consistency across all ALDI brands for %DI Discs, Health Star Rating, How to Read Panels, and NIPs, only Helvetica Neue is to be used in the weights shown. For Country of Origin food labelling, only Interstate Bold is to be used. HELVETICA NEUE 57 CONDENSED
• Ingredients heading: Helvetica Neue 85 Heavy, title case. Helvetica Neue 87 Heavy Condensed can be used when space is limited.
• Ingredients listing: Helvetica Neue 55 Roman, title case. Helvetica Neue 57 Condensed can be used when space is limited.
• Case: Ingredients list should appear in title case.
• The wording for the ALDI Guarantee is as shown below. It can run to as many lines as space dictates. Typefaces Helvetica Neue 55 Roman, title case. Helvetica Neue 57 Condensed can be used where space is limited.
• Both Address and Website is to be in the same colour, with no underline. Typefaces Helvetica Neue 55 Roman, upper case (Address). Helvetica Neue 75 Bold, lower case (Web Address). Helvetica Neue 57 Condensed can be used where space is limited (Address). Helvetica Neue 77 Bold Condensed can be used where space is limited (Web Address).
• Trademark name in text must always appear in capital letters regardless of how it is written in the logo. Typefaces Helvetica Neue 55 Roman. Helvetica Neue 57 Condensed can be used where space is restricted.
• To ensure consistency with the %DI information, only Helvetica Neue 77 Bold Condensed isto be used. HELVETICA NEUE 77 BOLD CONDENSED ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 01334567890
• To ensure consistency across all ALDI brands, only Helvetica Neue is to be used in the weights shown. HELVETICA NEUE 57 CONDENSED
• ABCDE…Z abcdefg h ij kl m nopq rstuvwxyz 01334567890 HELVETICA NEUE 75 BOLD
• ABCDE…Z abcdefghijklmnopqrstuvwxyz 01334567890 HELVETICA NEUE 77 BOLD CONDENSED

Logo Usage

• The following logos must be used on ALDI Australia Packaging when advised that they are applicable for use in the authorised Product Information Form (PIF).
• All available directly from the relevant organisation and have their individual guidelines to follow. Please ensure the correct logo is used, as identified in the PIF. INDEPENDENT ORGANISATION LOGOS (SAMPLE ONLY]
• The following logos must be used on ALDI Australia Packaging when advised that they are applicable for use in the approved PIF.
• NOTE: these logos are only to be used on non food products. Approved for ALDI use Australian Made/Product of Australia Logo
• Mono versions are available where pack colour limitations apply.
• These logos must be removed from artwork by 30th June 2018 for food products.
• The following logos are recommended to be used on ALDI Western Australia Packaging and ALDI South Australian Packaging when advised that they are applicable for use in the approved PIF. Approved for ALDI use Buy West Eat Best and Brand South Australia Logo
• The logo must always appear on the front face of pack. The only exception is in instances where there is not enough room on the front face. When this is the case the logo must appear on the back of pack or secondary face. The Buy West Eat Best logo and the Brand South Australia logo is to be used in addition to the Australian Made/Product of Australia/Australian Grown Logo (Non Food Products only) or the Standard Mark (Food and Beverage Products), not replacing it. Products featuring the Buy West Eat Best logo and Brand South Australia logo must only be distributed in their respective states.

Iconography

• The following icons can be used on ALDI Australia Packaging when advised that they are applicable for use in the authorised Product Information Form (PIF).
• When displaying Front of Pack claims3 options are available: • Option 1 -Use 1 branded claim and up to three secondary icons.
• • Option 2 -Use 1 branded claim plus a consolidated ‘Better For You’ icon (Happy Man Icon) • Option 3 -Use 1 branded claim plus lozenges
• Ideally all these options would accompany a branded claim.
• The PIF will determine the specific wording of all claims. In some instance wording can be chosen/dictated by the ALDI Buyer. PRODUCT CLAIM ICONS
• Ideally, packaging will contain a branded claim, with a maximum of three icons.
• In instances where three or more claims are applicable, Buyer will have the option of using a universal ‘better-for-you’ icon in conjunction with a branded claim.
• When a Buyer deems the use of either icons or the universal ‘better-for-you’ icon as inadequate or inappropriate, claims in a lozenge shape may continue to be used in conjunction with a branded claim, however consistent fonts must be used across all brands.
• The following logos must be used on ALDI Australia Packaging when advised that they are applicable for use in the authorised Product Information Form (PIF).
• All available directly from the relevant organisation and have their individual guidelines to follow. Please ensure the correct logo is used, as identified in the PIF.

Visual Style

• The front of pack includes, but is not limited to, brand, product title, secondary product descriptions/additional marketing information, images and graphics, Trade Measurement Statement and Health Star Rating or DI/ROI discs. The following pages show examples of front of packs and how the information is displayed.
• In this section the logos and icons for front of pack use have been included.
• The following icons can be used on ALDI Australia Packaging when advised that they are applicable for use in the authorised Product Information Form (PIF).
• When displaying Front of Pack claims3 options are available: • Option 1 -Use 1 branded claim and up to three secondary icons.
• • Option 2 -Use 1 branded claim plus a consolidated ‘Better For You’ icon (Happy Man Icon) • Option 3 -Use 1 branded claim plus lozenges
• Ideally all these options would accompany a branded claim.
• The PIF will determine the specific wording of all claims. In some instance wording can be chosen/dictated by the ALDI Buyer. PRODUCT CLAIM ICONS
• Ideally, packaging will contain a branded claim, with a maximum of three icons.
• In instances where three or more claims are applicable, Buyer will have the option of using a universal ‘better-for-you’ icon in conjunction with a branded claim.
• When a Buyer deems the use of either icons or the universal ‘better-for-you’ icon as inadequate or inappropriate, claims in a lozenge shape may continue to be used in conjunction with a branded claim, however consistent fonts must be used across all brands.
• To ensure consistency across all ALDI brands for Health Star Rating, %DI Discs, How to Read Panels, and NIPs, only Helvetica Neue is to be used in the weights shown. For Country of Origin food labelling, only Interstate Bold is to be used. HELVETICA NEUE 57 CONDENSED
• The following logos must be used on ALDI Australia Packaging when advised that they are applicable for use in the approved PIF.
• NOTE: these logos are only to be used on non food products. Approved for ALDI use Australian Made/Product of Australia Logo
• Mono versions are available where pack colour limitations apply.
• These logos must be removed from artwork by 30th June 2018 for food products.
• The following logos are recommended to be used on ALDI Western Australia Packaging and ALDI South Australian Packaging when advised that they are applicable for use in the approved PIF. Approved for ALDI use Buy West Eat Best and Brand South Australia Logo
• The logo must always appear on the front face of pack. The only exception is in instances where there is not enough room on the front face. When this is the case the logo must appear on the back of pack or secondary face. The Buy West Eat Best logo and the Brand South Australia logo is to be used in addition to the Australian Made/Product of Australia/Australian Grown Logo (Non Food Products only) or the Standard Mark (Food and Beverage Products), not replacing it. Products featuring the Buy West Eat Best logo and Brand South Australia logo must only be distributed in their respective states.
• Food & Beverage -The Australian flag can only be used where the Country of Origin Standard Mark includes use of a kangaroo logo and the percentage of Australian ingredients is> 50%, as prescribed in the PIF.
• Non-Food -The Australian flag can be used where the Country of Origin statement is “Product of Australia” or “Australian Grown” or “Made in Australia” (where percentage of Australian ingredients is > 50%), as prescribed in the PIF.
• The Australian flag logos must work as a complimentary design element to the overall pack design, not being too dominant proportionately. It can also only appear in full colour. No mono stripped back versions will be accepted, if the print specifications don’t support the colour make up or necessary registration the Australian Flag must not appear.
• Any Australian flag that is to be used on pack must follow the guidelines outlined below: • The flag should be used in a dignified manner and be reproduced completely and accurately • Any overprinting with words or illustrations on the artwork must not cover the symbolic aspects ofthe flag. i.e. the Union Jack, the Southern Cross or the Commonwealth Star • All symbolic aspects ofthe flag must be clearly identifiable with correct positioning on the flag, in the correct size proportion and stars must have the correct number of points
• The word Australian should be used in the product title where possible ifthe PIF specifies that the product is a Product of Australia or Australian Grown.
• COLOUR PALETTE CMYK 0%C, 93%M, 79%Y, 0%/K CMYK 100%C, 85%M, 5%Y, 22%K BLACK CMYK 0%C, 0%M, 0%Y, 100%K
• COLOUR: Complimentary to the colouring of the Health Star Rating, %DI Discs or base colour of pack.
• BRANDED ICONS: Key claims that need to be highlighted will be created in the Brands style.
• SIZE/LENGTH: See below for the relevant ratios for the lozenge. Size and length is determined by the pack size, please use the ratios below as a guide.
• When used against a red background apply a second stroke coloured white. The white stroke will have the same weight as the inside red stroke. RESIZING DEVICE: When scaling/resizing the Price/value device always scale in Uniform and check/tick the Scale Strokes & Effects option within Adobe Illustrator.
• When scaling/resizing the Price/value device always scale in Uniform and check/tick the Scale Strokes & Effects option within Adobe Illustrator.
• In both core and special ranges where a product uses batteries, the Active Energy logo needs to be placed on the artwork.
• PMS 285 Process Breakdown 90%C 48%M 0%Y 00/oK PMS 369 Process Breakdown 68%C 0%M100%Y 00/oK PANTONE 369
• If a product consists of many different plastic components (e.g. coffee machine or blender) and many components have food or mouth contact, the marketing material must indicate with disclaimers, wording or pointers which material exactly has been tested to be BPA-Free.
• MINIMUM SIZE P28
• CLEAR SPACE I Height8mm TOP -1/2 the Height of an A

Layout And Composition

• Ideally, packaging will contain a branded claim, with a maximum of three icons.
• In instances where three or more claims are applicable, Buyer will have the option of using a universal ‘better-for-you’ icon in conjunction with a branded claim.
• When a Buyer deems the use of either icons or the universal ‘better-for-you’ icon as inadequate or inappropriate, claims in a lozenge shape may continue to be used in conjunction with a branded claim, however consistent fonts must be used across all brands.
• The logo must always appear on the front face of pack. The only exception is in instances where there is not enough room on the front face. When this is the case the logo must appear on the back of pack or secondary face.
• The Australian flag logos must work as a complimentary design element to the overall pack design, not being too dominant proportionately. It can also only appear in full colour. No mono stripped back versions will be accepted, if the print specifications don’t support the colour make up or necessary registration the Australian Flag must not appear.
• Any Australian flag that is to be used on pack must follow the guidelines outlined below: • The flag should be used in a dignified manner and be reproduced completely and accurately • Any overprinting with words or illustrations on the artwork must not cover the symbolic aspects of the flag. i.e. the Union Jack, the Southern Cross or the Commonwealth Star • All symbolic aspects of the flag must be clearly identifiable with correct positioning on the flag, in the correct size proportion and stars must have the correct number of points
• COLOUR PALETTE CMYK 0%C, 93%M, 79%Y, 0%/K CMYK 100%C, 85%M, 5%Y, 22%K BLACK CMYK 0%C, 0%M, 0%Y, 100%K
• INCORRECT EXAMPLES White Mill)…….. @@@@ 1 kg %Daily Intake (%DI)* per 100 g serve AUSTRALIAN FLAG INCORRECT SIZE & COLOUR OF MONO AUSTRALIAN FLAG OVERPRINTED AUSTRALIAN FLAG
• COLOUR: Complimentary to the colouring of the Health Star Rating, %DI Discs or base colour of pack.
• NUMBER OF CLAIMS: This will depend on available space, if all claims will not fit your Buying Director will advise the most relevant for product.
• BRANDED ICONS: Key claims that need to be highlighted will be created in the Brands style.
• SIZE/LENGTH: See below for the relevant ratios for the lozenge. Size and length is determined by the pack size, please use the ratios below as a guide.
• HOW TO CREATE LOZENGE WHEN THE HEALTH STAR RATING IS APPLIED:
• HOW TO CREATE LOZENGE WHEN THE %DI DISCS ARE APPLIED:
• The price/value device can be used as a sticker on the front of packs, as directed by the Buying Director.
• When used against a red background apply a second stroke coloured white. The white stroke will have the same weight as the inside red stroke. RESIZING DEVICE: When scaling/resizing the Price/value device always scale in Uniform and check/tick the Scale Strokes & Effects option within Adobe Illustrator.

Nutrition Information Panel Guidelines

• To ensure consistency across all ALDI brands for Health Star Rating, %DI Discs, How to Read Panels, and NIPs, only Helvetica Neue is to be used in the weights shown. For Country of Origin food labelling, only Interstate Bold is to be used.
• Colour changes to compliment brand and pack colours.
• Size to suit the pack face. Minimum point size is 6pt.
• The Nutrition Information Panel (NIP) MUST be included on the Back of pack with the Ingredients. except when the Front and Back of pack are identical. then the NIP must be included on a side.
• NOTE 1: the NIP must always appear in exactly this format to ensure that it meets ALDI approval. NIP need to appear exactly as they are presented in the PIF User Guide.
• NOTE 2: “Protein” must be “Protein, total” in the presence of gluten values.
• NOTE 3: “Dietary Fibre” only needs to be written as “Dietary Fibre, total” where there are types of dietary fibre declared eg Polydextrose, lnulin.
• NOTE4: “*Percentage Daily Intakes are based on an average adult diet of 8700 kJ.” must appear at the bottom of the NIP. This is a mandatory legistative requirement. “Your daily intakes may be higher or lower depending on your energy needs” may be added at the discretion of the Buying Director.
• Heading Panel Primary colour 2 Heading Helvetica Neue 95 Black. white. uppercase. eg 9pt 3 Serving Information Helvetica Neue 55 Roman. white. title case. left aligned, eg 7/8pt 4 Details Panel Secondary colour 5 Subheads Helvetica Neue 77 Bold Condensed, white. title case. centred, eg 8/8pt 6 Details Headings Helvetica Neue77 Bold Condensed, white. title case. left aligned, eg 7.5/9pt 7 Details Copy Helvetica Neue 57 Condensed, white. title case. centred, eg 7.5/9pt 8 Details Highlight Panel 500/o secondary colour. alternative lines are highlighted for ease of reading 9 Footnotes Helvetica Neue75 Bold, white. title case. left aligned, eg 6.5/7pt, paragraph spacing 3pt 10 Keylines White, 1pt
• There are no column keylines, so ensure there is adequate spacing to clearly indicate the 3 columns of information.
• Vertical Margins, minimum of1mm. Horizontal Margins minimum of1.5mm.
• Please note, this example is for lithographic printing only. Other print processes should follow print specifications supplied.

Ingredient And Allergen Labelling

• Must be included with the NIP on back of pack.
• Ingredients heading: Helvetica Neue 85 Heavy, title case. Helvetica Neue 87 Heavy Condensed can be used when space is limited.
• Ingredients listing: Helvetica Neue 55 Roman, title case. Helvetica Neue 57 Condensed can be used when space is limited.
• Case: Ingredients list should appear in title case.
• THE INGREDIENTS LIST SHOULD FOLLOW THE FOLLOWING FORMAT Ingredients: Pasta (55%) [Durum Wheat Semolina, Water, Egg, Egg Yolk, Vegetable Oil], Filling (45%) {Cheeses (Hard Cheese, Ricotta & Gorgonzola) [Milk, Salt, Cultures (Including Penicillium roqueforti), Enzyme (Rennet)], Rice Semolina, Creme Fraiche (From Milk), Pears, Walnuts, Vegetable Oil, Flavour, Iodised Salt, Seasoning (Contains Flavour), Sugar}.
• Contains 7% Egg Products, 3.2% Ricotta, 2.3% Gorgonzola Cheese And 0.6% Walnuts.
• To provide customers transparency on product ingredients, ALDI branded products containing sustainable palm oil in accordance with this policy will include the following statement on pack, below the ingredients list: • Contributes to the Production of Sustainable Palm Oil (MB) -where the Mass Balance certification system of the RSPO is used. • Contains Sustainable Palm Oil (SG) -where the Segregated or Identity Preserved certification systems of the RSPO are used; and 95% of the palm oil used is from segregated sources. • Where a blend of sources is used, only the MB claim can be used on pack. Palm Oil Free claims are not permitted to be made.
• Ensure any characterising ingredients are identified in the ingredient list or located directly below the ingredient list. This is to be in addition to any claims made elsewhere on pack regarding the 0/o of characterising ingredients. If percentages would add up to over 10O0/o using the above rounding rules the unrounded percentages can be used -provided that these are not expressed in more than 3 significant figures. Note: For characterising ingredients present at 5% or more these are rounded to a whole number, and ingredients present at less than 5% are rounded to 1 decimal place. This will be prescribed in the PIF.
• Allergenic substances are identified in the ingredient list in bold type. It is also an ALDI requirement that a standardised CONTAINS summary statement accompany the ingredient list and if appropriate, a standardised precautionary statement. If the VITAL tool has been used to determine the allergen risks then a MAY BE PRESENT precautionary statement is used, otherwise a MAY CONTAIN precautionary statement is used.
• Allergenic ingredients & derivatives declared in bold each time they appear.
• Tree nuts specifically identified.
• Precautionary statement declared if appropriate. This statement should match the statement detailed in the authorised ALDI PIF.
• Summary statement listing all declareable allergenic ingredients in the product, as per Standard 1.2.3 Clause 1.2.3 - 4 of the Food Standards Code.

Health Star Rating Guidelines

• The full Health Star Rating is to be included on all eligible products where space permits, as an Artwork update or as part of New Packaging. It will be added in place of the %DI symbols. Either the HSR or %DI disc symbols will be on the front of pack, NOT both.
• The Health Star Rating (HSR) system complements the Nutrition Information Panel (NIP) by providing interpretive information on the front of packaged food and beverage products. The purpose of the HSR system is to provide convenient, relevant and readily understood nutrition information on food packs to assist consumers. The HSR system awards a star rating per 100g and 100mL of a food product based on a calculation using values for energy, saturated fat, total sugars, sodium, protein, dietary fibre, fruit vegetables nuts and legumes and for some products calcium. The use of icons for energy and nutrients should be considered for each product. Where present the Health Star Rating must always be on the front of pack.
• The Health Star Rating graphic should be coloured to complement the designs overall colour set. The colours to the right are for example only and can be changed to suit each brand.
• Please note: if the Health Star Rating is not as per pack contents then what this is based on should be written in brackets after per 100g or per 100ml (e.g. (when drained), (when prepared)). This will be prescribed in the PIF.
• 1. Health Star Rating - an overall evaluation of the food product based on its nutrient profile (per 100g or 100mL), presented as a star rating graphic and numeric, Star rating can include half points; 2. Energy Declaration - the average energy content of the food product on a per 100g or 100mL basis, or per pack when presented as a single portion intended for consumption in a single sitting, or per [reference portion] when presented as part of a multipack. At the Buying Directors discretion and in consultation with ALDI Corporate Responsibility the Energy Icon may be used as a minimum on very small packages and some confectionery and beverage products. 3. Nutrient content declarations - individual icons indicating the average quantity of prescribed nutrients (saturated fat, sugars and sodium) per 100g or 100mL basis, or per pack when presented as a single portion or per [reference portion] when presented as part of a multipack. 4. A single ‘positive’ nutrient may also be included only where all other elements of HSR are used. It must provide nutritional information only and the information must be contained within the NIP. Please refer to Health Star Rating Style Guide, section 3.5.2 Nutrient Icons. The nutrient must be present at a level consistent with FSANZ requirements as per schedule 4 of Standard 1.2.8. 5. The HSR graphic is to be designed without the High/Low indicators on the nutrient icons and without the %DI information on the energy icon. 6. The HSR graphic must be clearly separated from any other labelling schemes or logos. 7. The HSR graphic must be applied consistently across an entire range of products.
• To ensure consistency with the %DI information, only Helvetica Neue 77 Bold Condensed is to be used.
• The following configurations are to be used in priority order based on available space on the front of pack.
• Where space permits use the full HSR on all eligible products.
• Images shown here as left facing may be presented as right facing, retaining the order of the nutrients as displayed in relation to the HSR graphic (eg. the Energy icon must always be next to the HSR). The HSR graphic may also run vertically if required. When resizing the HSR graphic, ALL elements MUST be resized together to maintain the size ratio of element to element.
• Note: Where the HSR is already applied to product contrary to the above prescribed use, amendments may be made during future artwork updates (including after the deadline date of 01 Jun 20).
• The following table shows the scope of eligible Sub Commodity Groups (SCGs) based on HSR usage guidelines.

Recycling And Sustainability

• The following logos must be used on ALDI Australia Packaging when advised that they are applicable for use in the approved PIF.
• The “bin man” logo is only used on products which are intended to be consumed away from home.
• Use of the ARL is mandatory for the new Fresh Produce Blossom Lane, Fruitylicious, Lil Snackerz, Market Buy, The Fresh Salad Co and The Good Stuff Guidelines.
• Application of ARL requires ALDI Corporate Responsibilty to assess a product’s packaging material, dimensions and weight and advise on the correct ARL logo.
• Separable packaging components must be clearly labelled. See example A (below). The following specifications are required: • Only one separable component is to be identified in each ARL Symbol. If the packaging includes more than one separable component with the same classification, you must list multiple ARL Symbols.
• Multiple ARL symbols should be prioritised to be arranged on-pack in a vertical arrangement. Horizontal arrangement is available as a secondary option.
• The ARL should not be used next to symbols that may confuse the recycling message for consumers, such as littering symbols or alternative recycling symbols that have not been approved by APCO.
• Currently the only approved alternate recycling message is the REDcycle logo. This is not currently applicable to ALDI.
• The below design consideration must be adhered to when applying the ARL artwork to product packaging. • Font: ITC Avant Garde Gothic, Demi Condensed. Minimum size 2mm in height. • Do not place this ARL array on a busy background. A solid colour background is preferable. A reversed version has been created for darker backgrounds. See examples F-H (page 39). • Members must use the ARL artwork EPS files as they appear when downloaded or as sent by APCO. The ARL designs must not be altered other than when explicitly authorized by this User Guide or APCO.
• The minimum size for the ARL artwork is 12mm high (not including instructional tab).
• For small packaging projects, where on-pack labelling area is limited, the Micro ARL Style Guide must be followed (page 38).
• For small packaging projects where on-pack labelling area is limited, the Micro ARL may be suitable for use. All User Guide specifications are also applicable to the Micro ARL. The exemption however is that the height of the symbols can be decreased past 12mm, to as small as 8mm.
• There are three conditions associated with the use of the Micro ARL: • It can only be used when the external surface area of the packaging is less than 100 cm2 • The separable component name can have no more than four letters. ALDI will need to select the separable component name from the approved components list and if it is longer than 4 letters, adopt the synonym in the table, where available. • The Micro ARL artwork shall have the minimum dimensions as shown in the image below.
• A URL must always be present when using the ARL artwork to direct consumers to further information.
• There are three options for a light coloured background and three options for a dark colour background. The text ‘For more information on recycling visit arl.org.au’ can either be displayed to the top or right of the ARL artwork as displayed in examples C, D, F, G (page 39). In the case of limited on-pack labelling area, it is permitted to display only the ARL URL (arl.org.au/arl.og.au) vertically along the right hand side of the ARL artwork, see examples E and H (page 39).
• If unable to display a third party website on-pack, there is the opportunity for the ALDI’s website to be used as an alternative. Please refer to the below specifications if an alternate URL is to be displayed: • Only the Member’s URL is applicable as an alternative; • The label must include text that points the consumer to the URL for further information about recycling; • The Member’s website must have easily accessible and readily available ARL information. This must be kept up to date and provide consumers with a link to the ARL website (arl.org.au/arl.org.au). • Alternate URL use must be approved, contact ALDI Corporate Responsibilty.
• The following statement must be used on ALDI Packaging only when advised that they are applicable for use by the Technical Service Provider in the PIF. • Must comply: The numeric ‘10’ must be a minimum of 3 mm. The smallest letter in the wording must be a minimum of 1.5 mm. • Comply where possible: A minimum 3 mm ‘free space· boundary around the refund marking is recommended. If 3mm clearance is not achievable, comply as close to 3mm as possible.
• Board Grade • Durability for carton contents & merchandising requirements • Flute options • Lining options e.g. Double White lined or brown board • High Content of Recycled cardboard is preferred

Corporate Responsibility Certifications

• The MSC ecolabel comprises six elements, which may not be separated from each other or altered in any way. A -‘Certified sustainable seafood’ This phrase communicates the meaning of the MSC ecolabel. Appropriate translations into different languages are available from the MSC. B -MSC initials The letters MSC are the abbreviation of the Marine Stewardship Council, the owner of the ecolabel. C -www.msc.org The MSC’s website address must always be displayed in its whole form, as shown here. D -White keyline The white line which outlines the fish checkmark and the ecolabel as a whole must always be displayed. E -TM The letters TM indicate that this ecolabel is a trademark. Registration of the MSC trademark is already approved in many countries. F -Fish checkmark The oval shape forms the pictorial part of the ecolabel and illustrates a fish body that incorporates a checkmark, or tick.
• When the MSC ecolabel is used on product, it must always be accompanied by the ‘MSC claim’. The claim explains and substantiates the MSC ecolabel and is available in five versions: Version1* “Thank you for choosing seafood that has met the MSC’s global standard for sustainability. Together we can help protect fish stocks for the future. www.msc.org”* Version 2* “This product comes from a fishery that has been independently certified to the MSC’s standard for a well-managed and sustainable fishery. www.msc.org”* Version3 “The XXXXXX (insert seafood species) in this product comes from a fishery that has been independently certified to the MSC’s standard for a well-managed and sustainable fishery. www.msc.org” Version4 “This seafood has met the MSC’s global standard for sustainability. www.msc.org” Version 5 “From an MSC certified sustainable fishery. www.msc.org”
• The Chain of Custody code of the MSC-labelled product shall be displayed next to the MSC ecolabel. Rule on which Coe code is displayed on pack: The Coe code that appears on the product is the code of the owner of the seafood at the time of placing the product into MSC-labelled packaging. This is the default position.
• The MSC ecolabel is available in two formats: a landscape (horizontal) format and a portrait (vertical) format. Both formats may be displayed and it is possible for the same user to display one format of the MSC ecolabel on one application and the other format on a different application.
• Where the ecolabel appears in colour use Pantone PMS286. CMYK When reproducing using the four-colour printing process the colour breakdown is 100% Cyan, 60% Magenta. RGB R. 0 G.102 B.179 Monotone The MSC ecolabel is also available in black and white for those circumstances where the packaging is black & white or predominantly blue. In these instances, it must print in solid black and white only, never in grey-scale. These exceptions will be agreed at the discretion of MSCI.
• The minimum size for on-product applications of the landscape (horizontal) ecolabel is 10mm (measured from the base to the top of the lefthand side). The minimum size for the portrait (vertical) ecolabel is 14mm (measured from side to side at the top). Minimum size requirements for bulk packaging are 20mm and 28mm, respectively.
• There is no maximum size restriction for display of the MSC ecolabel or its variations, either on-product or off-product.
• In all instances the white keyline surrounding the ecolabel must print. No other colour may be used.
• The font used in the MSC ecolabel is Myriad Pro semi-bold and cannot be substituted.
• When the ecolabel is produced at its minimum size, the clear space around it must be at least 2mm for product-specific text (such as species, weight, ingredients) where the text does not lead to a connection between the MSC and any other organisation. Clear space must be at least 5mm for general packaging design elements (such as brand names or logos) where the MSC ecolabel could be associated with the host brand. When the ecolabel is reproduced at larger sizes it must be surrounded by clear space at 10% of the ecolabel height (portrait format) or width (landscape format).
• If the licensee chooses to display the ecolabel as a sticket, it should be noted that MSC does not recommend stickers as an on-going solution to labelling certified product. Specific permission must be requested and use will be limited to a period of six months.
• Each sticker should display: • the MSC ecolabel with the relevant trademark status symbol; • the Chain of Custody Code of the company placing the sticker on the product The sticker must be applied to the front of the packaging and must not be broken, distorted or tilted from its axis.
• Colour of the MSC ecolabel:the approved Pantone colour is PMS 286 (C100, M60, YO, KO -four colour process).
• The following requirements will now apply whenever MSC, at its discretion, approves stickers for conveying certified product information.
• The Alaska Seafood Marketing Institute has made a certification seal available for those who satisfy the Chain of Custody requirements. There is no logo licensing fee for using this seal. Rules The certification seal is a trademark owned by the Alaska Seafood Marketing Institute (ASMI) and is only released to organizations or individuals that have a written agreement with ASMI. Unauthorized use is prohibited and will be treated as a trademark breach. The purpose of the certification seal is to guarantee buyers and consumers of Alaska seafood products that the products originate from certified responsible fisheries.
• Stakeholders that have obtained the Alaska Chain of Custody Certification can apply to ASMI for the right to use the certification seal or statement for marketing purposes. To apply, please complete the application form and submit to Heather Carey at hcarey@alaskaseafood.org.
• The GLOBALG.A.P. trademark shall never appear on the product, consumer packaging of the product nor at the point of sale where in direct connection to single products. It shall never be used on promotional items, apparel items or accessories of any kind, bags of any kind, or personal care items, or in connection with retail store services. GLOBALG.A.P. retailer, associate and supplier members can use the trademark in promotional print-outs, flyers, hardware and electronic displays (not directly linked to certified product) and in business-to-business communication.
• The UTZ name and logo provide independent assurance for the brand/ company’s commitment to sustainability and sustainable sourcing. Therefore, it is essential to safeguard the independent status and endorsement function of the UTZ name and logo. Their uniform use builds awareness and recognition and entails the following: • In the name ‘UTZ’, UTZ has to be written in capitals. • The name of the organization UTZ may not be translated into other languages. • When using ·certified’ as an adjective (i.e. UTZ certified coffee or UTZ certified farmers) the word certified should be written with a small ‘c’and may be translated. • Confusing or misleading use is prohibited. UTZ should not refer to or be linked to wording such as ‘fair’, ‘fair trade’ or ‘organic’. • It is prohibited to associate the UTZ name or logo with companies, products or services that are not verified as (part of) UTZ. • The use of UTZ as (part of) a brand name is prohibited (see images). • The brand name and logo should always be leading (see images).
• Before going to print, all products carrying the UTZ label must be approved by UTZ through their online Good Inside Portal on www.goodinsideportal.org. Suppliers will require a login to the Good Inside Portal to provide information about the product(s) and upload the product’s artwork. Once submitted, UTZ will approve/ deny the artwork within 5 working days.
• Until approval is provided by UTZ, product development/ artwork must be placed on hold.
• The Rainforest Alliance Certified™ seal should not be reproduced in a size smaller than one inch (25.4 mm) across for standard packaging sizes.

Packaging Certification

• The MSC ecolabel comprises six elements, which may not be separated from each other or altered in any way. A -‘Certified sustainable seafood’ B -MSC initials C -www.msc.org D -White keyline E -TM F -Fish checkmark
• When the MSC ecolabel is used on product, it must always be accompanied by the ‘MSC claim’. The claim explains and substantiates the MSC ecolabel and is available in five versions: Version1* “Thank you for choosing seafood that has met the MSC’s global standard for sustainability. Together we can help protect fish stocks for the future. www.msc.org”* Version 2* “This product comes from a fishery that has been independently certified to the MSC’s standard for a well-managed and sustainable fishery. www.msc.org”* Version3 “The XXXXXX (insert seafood species) in this product comes from a fishery that has been independently certified to the MSC’s standard for a well-managed and sustainable fishery. www.msc.org” Version4 “This seafood has met the MSC’s global standard for sustainability. www.msc.org” Version 5 “From an MSC certified sustainable fishery. www.msc.org”
• The Chain of Custody code of the MSC-labelled product shall be displayed next to the MSC ecolabel. Rule on which Coe code is displayed on pack: The Coe code that appears on the product is the code of the owner of the seafood at the time of placing the product into MSC-labelled packaging. This is the default position.
• The MSC ecolabel is available in two formats: a landscape (horizontal) format and a portrait (vertical) format. Both formats may be displayed and it is possible for the same user to display one format of the MSC ecolabel on one application and the other format on a different application.
• Where the ecolabel appears in colour use Pantone PMS286. CMYK: When reproducing using the four-colour printing process the colour breakdown is 100% Cyan, 60% Magenta. RGB: R. 0 G.102 B.179 Monotone: The MSC ecolabel is also available in black and white for those circumstances where the packaging is black & white or predominantly blue. In these instances, it must print in solid black and white only, never in grey-scale.
• The minimum size for on-product applications of the landscape (horizontal) ecolabel is 10mm (measured from the base to the top of the lefthand side). The minimum size for the portrait (vertical) ecolabel is 14mm (measured from side to side at the top). Minimum size requirements for bulk packaging are 20mm and 28mm, respectively.
• In all instances the white keyline surrounding the ecolabel must print. No other colour may be used. The font used in the MSC ecolabel is Myriad Pro semi-bold and cannot be substituted.
• When the ecolabel is produced at its minimum size, the clear space around it must be at least 2mm for product-specific text (such as species, weight, ingredients) where the text does not lead to a connection between the MSC and any other organisation. Clear space must be at least 5mm for general packaging design elements (such as brand names or logos) where the MSC ecolabel could be associated with the host brand. When the ecolabel is reproduced at larger sizes it must be surrounded by clear space at 10% of the ecolabel height (portrait format) or width (landscape format).
• If the licensee chooses to display the ecolabel as a sticker, it should be noted that MSC does not recommend stickers as an on-going solution to labelling certified product. Specific permission must be requested and use will be limited to a period of six months. Each sticker should display: • the MSC ecolabel with the relevant trademark status symbol; • the Chain of Custody Code of the company placing the sticker on the product. The sticker must be applied to the front of the packaging and must not be broken, distorted or tilted from its axis.
• The Alaska Seafood Marketing Institute has made a certification seal available for those who satisfy the Chain of Custody requirements. There is no logo licensing fee for using this seal. The certification seal is a trademark owned by the Alaska Seafood Marketing Institute (ASMI) and is only released to organizations or individuals that have a written agreement with ASMI. Unauthorized use is prohibited and will be treated as a trademark breach. The purpose of the certification seal is to guarantee buyers and consumers of Alaska seafood products that the products originate from certified responsible fisheries.
• Stakeholders that have obtained the Alaska Chain of Custody Certification can apply to ASMI for the right to use the certification seal or statement for marketing purposes. To apply, please complete the application form and submit to Heather Carey at hcarey@alaskaseafood.org.
• The ASC logo comprises eight elements, which may not be separated from each other or altered in any way. A -‘Farmed Responsibly’ B -ASC initials C -Certified D -asc-aqua.org E -Fish logo F -TM G -Checkmark H -White keyline
• When the ASC logo is used on product, it must always be accompanied by the ASC claim’. The claim explains and substantiates the ASC logo and is available in five versions: Version1 “Thank you for choosing seafood that has met the ASC’s global standard for responsibly farmed fish. Together we can help transform aquaculture towards environmental sustainability and social responsibility. www.asc-aqua.org” Version2 “This product comes from a farm that has been independently certified to the ASC’s standard for responsibly farmed seafood. www.asc-aqua.org” Version3 “The XXXXXXXXX (insert seafood species) in this product comes from a farm that has been independently certified to the ASC’s standard for responsibly farmed seafood. www.asc-aqua.org” Version4 “This product has met the ASC’s global standard for responsibly farmed seafood. www.asc-aqua.org” Version 5 “From an ASC certified responsible farm. www.asc-aqua.org”
• The Chain of Custody code of the ASC-labelled product shall be displayed next to the ASC ecolabel with one of the claims noted above.
• The ASC logo is available in two formats: a landscape (horizontal) format and a portrait (vertical) format. Either format may be displayed and it is possible for the same user to display one format of the ASC logo on one application and the other format on a different application.
• Where the logo appears in colour use Pantone 326 c. CMYK: When reproducing using the four-colour printing process the colour breakdown is 81% Cyan, 0% Magenta, 39% Yellow, 0% Black. RGB: R. 0 G. 178 B.169 Monotone: The ASC logo is also available in black and white for those circumstances where the packaging is black and white or predominantly green. In these instances, it must print in solid black and white only, never in grey-scale.
• The minimum size for on-product applications of the landscape (horizontal) logo is 16mm (measured from the base to the top of the left-hand side). The minimum size for the portrait (vertical) logo is 18mm (measured from side to side at the top). Minimum size requirements for bulk packaging are 20mm and 28mm, respectively.
• In all instances the white lines used in the logo must print. No other colour may be used. The font used in the ASC logo is Helvetica and cannot be substituted.
• When the logo is produced at its minimum size, the clear space around it must be at least 2 mm for product-specific text (such as species, weight, ingredients) and must ensure that the text does not lead to a connection between the ASC and any other organisation. Clear space must be at least 5 mm for general packaging design elements (such as brand names, logos etc) where the ASC logo could be associated with the host brand. When the logo is reproduced at larger sizes it must be surrounded by clear space at 10% of the logo height (portrait format) or width (landscape format).

Outer Carton Guidelines

• This document will provide an overview of the outer packaging requirements for Aldi to help deliver outer cartons that are: • Functional and protect the product • Efficient and optimised for our shelves • Quick and easy to merchandise • Consistent in structural design • Consistent in colour and print
• Deviation from these standards will result in a non conformance, unless the deviation is approved prior to the delivery by the relevant Buying Director.
• Cases should optimise shelf depth as shown opposite. Ambient shelves: • 800mm deep • Cartons should not exceed 400mm in depth • The shelving height and width is dependent on the category. Please refer to the category guidelines for specific category requirements. Chiller Shelves: • 600-800mm deep • The shelving height and width is dependent on the category. Please refer to the category guidelines for specific category requirements.
• Cases should optimise the 1165mmx1165mm for A Pallet or 775mmx590mm for D Pallet.
• Check with Buying Director prior to carton development to ensure this requirement does not vary from above.
• Prior to commencing work on any outer carton design and production the Buying Director must confirm the following: • Single or Mixed Case • Quantity of product • Orientation of product • Merchandising position (lower/middle/upper shelf/registers or freezer tops) • Weight of total carton • Carton is stackable. Ensuring outer carton and lid are strong enough to support stacked cartons for shelf display and transportation of product from supplier to warehouse and stores.
• Ensure that a sample carton is provided at time of submission.
• GOLDEN RULES CHECKLIST I ti I No perforations (unless unavoidable) I ti I No Shrink wrap / No rape I ti I Removable lid (if required) I ti I Good product visibility & accessibility stackable
• Carton • No perforations -unless agreed with Buying Director • If tape must be used, ensure the seal is left to right with no tape showing on the front of the carton
• Lip width & height should be minimised to ensure maximum visibility of the product • Product artwork orientation must ensure visibility & accessibility (consider shelf position)
• The main purpose of the lid is to: • Protect primary product through the supply chain • Provides stacking strength in-store (if required) • Removes the need for perforated edges Lids can be: • Plain brown or white if removed in store and not required for stacking or display • Printed to match the base if required for in-store stacking • Lids should have thumb holes for ease of removal
• Where possible the graphics on the consumer facing panel should be positioned as detailed below Consumer Facing Panel Product Title Centre ALDI Brand Name Lower Left Volume Statement Lower Right Australian Flag If qualifies: above brand
• Consumer Facing Panel Side Panels Base Product title Product title ALDI Address ALDI Brand Name ALDI Brand Name Trade Mark Statement Volume Statement Volume Statement Recycle Logo Australian Flag (if qualifies)
• Outer Cartons must be clearly labeled with the following: If outer carton WILL NOT be displayed in store - Product Code Product Description Case Size If outer carton WILL be displayed in store (product code must be printed on 2 x A4 sheets shrink wrapped to each side of pallet)- Prod uct Description Case Size All outer carton artwork must be approved by ALDI Stores before production.
• Board Grade • Durability for carton contents & merchandising requirements • Flute options • Lining options e.g. Double White lined or brown board • High Content of Recycled cardboard is preferred Print Process • Lithographic: Superior • Pre Print: Premium • Flexographic: High Quality • Digital Print: Lower Quality • Post Print: Poor Quality Target Proofs It is a must that the supplier provides printers proofs for final sign off with Buying Director. Consistency • Colour consistency is a vital part of ALDI merchandising. A proof, if required, must be provided to ALDI for Buying Director approval before proceeding to print.
• Failure to comply may result in rejection of stock.
• GOLDEN RULE CHECKLIST Board Grade Print Process Target Proofs Consistency
• Freezer Transit Cases • Brown inner& outer liners • No stretch wrap • No staples • Labels or tape must be stable at -25°C • Products packed into the box face down to improve decanting in store • Black text only • Each print face carries the same printed information, as agreed with the Buying Director • Product code to be printed directly onto outer case as this is not used as a display case • Maximise pallet configuration with no overhang
• Products being shipped into Aldi must fully utilise the pallet footprint wherever possible • Pallets must be clearly labelled with the ALDI Stores product code on A4 sized stickers/sheets, one on each of the open ends of the pallet • Overhang is not permitted • Utilise the maximum height limitations (subject to safe stacking and load stability) • Do not use tape to contain the cases on the pallets • Product codes are not to be printed on outer cartons (Freezer Cartons are exempt)
• Shrink Wrapping • Products must be securely wrapped to the pallet to avoid movement. Additional wrap at the top and bottom of the pallet should be applied • Overly tight stretch-wrap should be avoided as it creates weakness within the carton structure Lidded Cartons • It is preferable that lidded cartons are stacked facing inwards towards the centre of the pallet
• Perforated Cartons • For an enclosed case, we recommend having the perforated side facing inwards to avoid any potential opening during transportation Maximum pallet height: • A-Pallets: up to 1.65m (by road) • D-Pallets: up to 1.8m (by road) • A-pallets: up to 1.25m (by rail) • D-pallets: up to 1.25m (by rail)
• The following points in supply chain must be considered: • Shipping full pallets into the Aldi DC, ensuring the bottom cartons do not crush • Storage in Aldi DC to withstand relevant temperature regimes as per product specification • Manual handling of the case both at the DC and in store • Shipping from the DC to store on a mixed pallet with other cartons • In store customer behaviour whereby product could be picked from any carton in a stack
• For further detailed information, please refer to Aldi Terms & Conditions.
• Please note there are Category Specific Guidelines that should also be taken into consideration. These need to be discussed with the relevant Buying Director. • Ensure that a sample carton is provided at time of submission.
• Deviation from the agreed will result in non conformance & rejection, unless the deviation is approved prior to the delivery by the relevant Buying Director.

Shelf And Palletisation Guidelines

• Cases should optimise shelf depth as shown opposite. Ambient shelves: • 800mm deep • Cartons should not exceed 400mm in depth • The shelving height and width is dependent on the category. Please refer to the category guidelines for specific category requirements. Chiller Shelves: • 600-800mm deep • The shelving height and width is dependent on the category. Please refer to the category guidelines for specific category requirements.
• Cases should optimise the 1165mmx1165mm for A Pallet or 775mmx590mm for D Pallet.
• Check with Buying Director prior to carton development to ensure this requirement does not vary from above.
• Prior to commencing work on any outer carton design and production the Buying Director must confirm the following: • Single or Mixed Case • Quantity of product • Orientation of product • Merchandising position (lower/middle/upper shelf/registers or freezer tops) • Weight of total carton • Carton is stackable. Ensuring outer carton and lid are strong enough to support stacked cartons for shelf display and transportation of product from supplier to warehouse and stores.
• Ensure that a sample carton is provided at time of submission.
• No perforations (unless unavoidable)
• No Shrink wrap
• No tape
• Removable lid (if required)
• Good product visibility & accessibility
• Stackable
• Carton • No perforations -unless agreed with Buying Director • If tape must be used, ensure the seal is left to right with no tape showing on the front of the carton
• Lip width & height should be minimised to ensure maximum visibility of the product
• Product artwork orientation must ensure visibility & accessibility (consider shelf position)
• The main purpose of the lid is to: • Protect primary product through the supply chain • Provides stacking strength in-store (if required) • Removes the need for perforated edges Lids can be: • Plain brown or white if removed in store and not required for stacking or display • Printed to match the base if required for in-store stacking • Lids should have thumb holes for ease of removal
• Where possible the graphics on the consumer facing panel should be positioned as detailed below Consumer Facing Panel Product Title: Centre ALDI Brand Name: Lower Left Volume Statement: Lower Right Australian Flag: If qualifies: above brand
• Outer Cartons must be clearly labeled with the following: If outer carton WILL NOT be displayed in store - Product Code Product Description Case Size If outer carton WILL be displayed in store (product code must be printed on 2 x A4 sheets shrink wrapped to each side of pallet)- Product Description Case Size All outer carton artwork must be approved by ALDI Stores before production.
• Board Grade • Durability for carton contents & merchandising requirements • Flute options • Lining options e.g. Double White lined or brown board • High Content of Recycled cardboard is preferred
• Print Process • Lithographic: Superior • Pre Print: Premium • Flexographic: High Quality • Digital Print: Lower Quality • Post Print: Poor Quality
• Target Proofs It is a must that the supplier provides printers proofs for final sign off with Buying Director. Consistency • Colour consistency is a vital part of ALDI merchandising. A proof, if required, must be provided to ALDI for Buying Director approval before proceeding to print.
• Failure to comply may result in rejection of stock.
• Freezer Transit Cases • Brown inner& outer liners • No stretch wrap • No staples • Labels or tape must be stable at -25°C • Products packed into the box face down to improve decanting in store • Black text only • Each print face carries the same printed information, as agreed with the Buying Director • Product code to be printed directly onto outer case as this is not used as a display case • Maximise pallet configuration with no overhang
• Pallet Information • Products being shipped into Aldi must fully utilise the pallet footprint wherever possible • Pallets must be clearly labelled with the ALDI Stores product code on A4 sized stickers/sheets, one on each of the open ends of the pallet
• Overhang is not permitted
• Utilise the maximum height limitations (subject to safe stacking and load stability)
• Do not use tape to contain the cases on the pallets
• Product codes are not to be printed on outer cartons (Freezer Cartons are exempt)
• Shrink Wrapping • Products must be securely wrapped to the pallet to avoid movement. Additional wrap at the top and bottom of the pallet should be applied • Overly tight stretch-wrap should be avoided as it creates weakness within the carton structure
• Lidded Cartons • It is preferable that lidded cartons are stacked facing inwards towards the centre of the pallet
• Perforated Cartons • For an enclosed case, we recommend having the perforated side facing inwards to avoid any potential opening during transportation
• Maximum pallet height: • A-Pallets: up to 1.65m (by road) • D-Pallets: up to 1.8m (by road) • A-pallets: up to 1.25m (by rail) • D-pallets: up to 1.25m (by rail)
• The following points in supply chain must be considered: • Shipping full pallets into the Aldi DC, ensuring the bottom cartons do not crush • Storage in Aldi DC to withstand relevant temperature regimes as per product specification • Manual handling of the case both at the DC and in store • Shipping from the DC to store on a mixed pallet with other cartons • In store customer behaviour whereby product could be picked from any carton in a stack
• Cases must be easy to break down and fully recyclable
• Cases are typically stacked on top of each other, with product being picked from any case
• Cases are manually picked from the pallet at back of store and merchandised
• Mixed pallets are then loaded and shipped to store
• Bottom layers to withstand load without crushing
• Please note there are Category Specific Guidelines that should also be taken into consideration. These need to be discussed with the relevant Buying Director.
• Deviation from the agreed will result in non conformance & rejection, unless the deviation is approved prior to the delivery by the relevant Buying Director.

Additional Properties